Netcitadel Firewall Builder V3.0.1.565

__CHILLI__ · 11-17-2008, 10:08 AM

Netcitadel Firewall Builder V3.0.1.565

Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path.

Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines.

Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed.

[Only registered users can see links. ]
Pass: sharingcentre.info

checked by L!TH!UM 11/9/09

**babe ko** · 12-25-2008, 10:52 AM

NetCitadel Firewall Builder 3.0.3

NetCitadel Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path.

Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines.

Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed.

[Only registered users can see links. ]

Prince The Killer · 04-23-2009, 02:35 PM

NetCitadel Firewall Builder 3.0.4.794 | 8.55 Mb
Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path.

Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines.

Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed.

[Only registered users can see links. ]

[Only registered users can see links. ]

[Only registered users can see links. ]

04-23-2009, 06:57 PM

NetCitadel Firewall Builder 3.0.4.794

NetCitadel Firewall Builder 3.0.4.794 | 8.55 Mb

Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path.

Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines.

Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed.

[Only registered users can see links. ]

[Only registered users can see links. ]

[Only registered users can see links. ]

**-.__KinG__.-** · 04-29-2009, 01:31 PM

NetCitadel Firewall Builder 3.0.4.794

NetCitadel Firewall Builder 3.0.4.794 | 8.55 Mb

NetCitadel Firewall Builder v3.0.4.794
Firewall Builder is a GUI firewall configuration and management tool that supports iptables (netfilter), ipfilter, pf, ipfw, Cisco PIX (FWSM, ASA) and Cisco routers extended access lists. Both network administrators and hobbyists managing firewalls with policies more complex that is allowed by simple web based UI can simplify management tasks with the application. The program runs on Linux, FreeBSD, OpenBSD, Windows and Mac OS X and can manage both local and remote firewalls.

With Firewall Builder, administrator can manage multiple firewalls using the same database of network objects. Change made to an object is immediately reflected in the policy of all firewalls using this object

Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode and can update policy of multiple firewalls in one session

In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy.

[Only registered users can see links. ]

Above link contain 4 mirror links
2shared
depositefile
filefactory
Rapidshare

**Autumn** · 05-24-2009, 10:41 PM

Netcitadel Firewall Builder v3.0.1.565
Firewall Builder is a GUI firewall configuration and management tool that supports iptables (netfilter), ipfilter, pf, ipfw, Cisco PIX (FWSM, ASA) and Cisco routers extended access lists. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations

Key Features

Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path.

[Only registered users can see links. ], which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x.

[Only registered users can see links. ] adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security.

Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines.

Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session.

In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed.

HomePage:

[Only registered users can see links. ]

[Only registered users can see links. ]

**_____Mr.Juzzto_____** · 09-11-2009, 02:11 PM

NetCitadel Firewall Builder v3.0.6 | 7.97MB

NetCitadel Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path.

Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines.

Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed.

Download from Hotfile - All Country
[Only registered users can see links. ]

**Autumn** · 09-11-2009, 02:28 PM

[Only registered users can see links. ]
NetCitadel Firewall Builder v3.0.6 | 7.97MB

NetCitadel Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path.

Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines.

Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed.

Download:
[Only registered users can see links. ]

**-Rishu-** · 09-11-2009, 07:35 PM

NetCitadel Firewall Builder v3.0.6 | 7,71MBs
NetCitadel Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms.

Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations.

Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path.

Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines.

Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed.

Features:

GUI and compilers v3.0.6 require API library libfwbuilder version 3.0.6
Summary

Most notable new features in this release:

* Bug fixes in the GUI to improve stability and fix problems with policy printing
* Additional optimizations in generated iptables script
* Improvements in the policy compiler for PF to streamline generated configuration

For those who wish to build from source, instructions are outlined in the document "Install and Build instructions" on our web site

Improvements and bug fixes in the GUI

* bug #2807724: "Print out FWB still not ok". Rule groups were always printed expanded, even if they were collapsed by the user in the GUI.
* bug #2823668: "MDI window glitch". If the GUI had two or more MDI windows and user moved rules in one of them, the GUI switched to another after the operation was complete.
* bug #2835193: "Modulate state doesnt work for PF". The name Xml attribute used to hold the value of "module state" option was entered incorrectly in the dialog.

Improvements and bug fixes in the policy compiler for iptables

* bug #2820840: "IPT: prolog script+iptables-restore silent incompatibility". With this fix the GUI does not allow for the prolog script to be placed after policy reset if iptables-restore is used to activate iptables rules. Also policy compiler for iptables checks for this condition and aborts with an error message if prolog place is set to "after reset" but iptables-restore is used to activate policy. Configuration may end up with this combination of options if user set prolog place to "after reset" first and switched activation method to iptables-restore later.
* bug #2821050: "loading new fw rules on iptables 1.4.3.2+ gives warnings". starting with v1.4.3.1 iptables started giving warnings when negation ("!") is used after --option. This fix adds version "1.4.3" to the list of recognized iptables versions in fwbuilder and makes compiler generate extrapositioned version of the option such as "! --option arg".
* bug #2819901: "sub-optimal expansion of negated interface". Policy rules with single interface object in "interface" rule element with negation should generate iptables commands using "-i ! itf" or "-o ! itf" rather than multiply the rule using all other interfaces of the firewall. Note that for iptables v1.4.3 and later, extrapositioned syntax is used, such as "! -i itf".
* bug #2822098: "IPT: adds useless "-i +" iin some cases". Added optimization to remove redundant "-i +" and "-o +" if chain is INPUT or OUTPUT.
* bug #2823951: "unnecessary rules in FORWARD chain". Policy rules that have interface object in "Interface" column and direction "Both" generate unnecessary iptables commands in the FORWARD chain when destination matches one of the addresses that belong to the firewall.
* Implemented a better way to do optimization for "-i +", "-o +" for bug #2822098: check for interfaceStr equal to "*" instead of re->isAny()
* bug #2836321: "SNAT rule that changes Trans Src and Trans Port does not work". Dual translation rules that change source address and destination port are now supported.

Improvements and bug fixes in the policy compiler for PF

* bug #2820162 "Bad sysctl name for OpenBSD pf" - the sysctl argument for IPv6 forwarding was incorrect.
* Implemented change per bug #2828602: "PF Compiler Direction Both no Duplication Patch". PF rules with direction "both" used to be split to make two rules, one with direction "inbound" and another with direction "outbound". This was an artefact of old rule generation model where user could choose to permit everything outbound and only generate inbound rules, or generate both inbound and outbound rules. Since we now always generate both in abd out rules and PF matches both directions when neither "in" or "out" is specificed, this splitting has become redundant.
* Applied patch per bug report #2828633: "Patch: Warning when changing rule direction in compiler". This adds warning when rule direction is changed by the compiler because object in source or destination was firewall itself.
* remove extra white space after tcp port spec if source port match was not used in the rule.
* bug #2835193: "Modulate state doesnt work for PF". Check variable "modulate state" in rule optiopns and global firewall options. If checkbox is turned on in the firewall options, then we always use "modulate state". This option can also be turned on for an individual rule using rule options dialog.

Improvements and bug fixes in the policy compiler for Cisco IOS ACL

* bug #1778536 "IOSACL - remark command". Remarks now include rule comments; if comment consists of several lines, each line is added using separate remark statement. This works for both IOS ACL and PIX platforms.
*
Improvements and bug fixes in the policy compiler for Cisco ASA (PIX)

*
Improvements and bug fixes in libfwbuilder

* fixed bug #2820152: "Address ranges and other such need IPv4/v6 typing". AddressRange object should be recognized and removed from the rule if it is used in ipv6 rule set. To do this, add virtual method hasInetAddress() (should return true) to indicate that this object has an address. This works since virtual method getAddressPtr() has been implemented anyway.
* bug #2823424: "Deleting UserService object breaks data file format". When user deleted UserService object, it was moved to the "Deleted Objects" library which broke XML file because DTD did not allow UserService element as a child of Library

DownloadSize: 2,65 MB)

[Only registered users can see links. ]

11-17-2008, 10:08 AM	#1 (permalink)
__CHILLI__ VipraSys Addict Join Date: Oct 2007 Location: Australia Posts: 1,273 Thanks: 2,883 Thanked 2,202 Times in 692 Posts Reputation: 20238	Netcitadel Firewall Builder V3.0.1.565 Netcitadel Firewall Builder V3.0.1.565 Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path. Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines. Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed. [Only registered users can see links. ] Pass: sharingcentre.info checked by L!TH!UM 11/9/09 Last edited by Tw!SteD+F@!tH : 09-11-2009 at 07:57 PM.

12-25-2008, 10:52 AM	#2 (permalink)
babe ko ~it hurts~ Join Date: Dec 2007 Posts: 9,565 Thanks: 302 Thanked 4,810 Times in 2,596 Posts Reputation: 107955	Re: Netcitadel Firewall Builder V3.0.1.565 NetCitadel Firewall Builder 3.0.3 NetCitadel Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path. Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines. Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed. [Only registered users can see links. ] Last edited by Tw!SteD+F@!tH : 09-11-2009 at 07:57 PM.

04-23-2009, 02:35 PM	#3 (permalink)
Prince The Killer VipraSys Addict Join Date: Apr 2008 Location: France Posts: 5,969 Thanks: 166 Thanked 5,633 Times in 1,834 Posts Reputation: 22199	Re: Netcitadel Firewall Builder V3.0.1.565 NetCitadel Firewall Builder 3.0.4.794 \| 8.55 Mb Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path. Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines. Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed. [Only registered users can see links. ] [Only registered users can see links. ] [Only registered users can see links. ]

04-23-2009, 06:57 PM	#4 (permalink)
F.O.R.U.M - E.L.I.T.E Join Date: Feb 2008 Posts: 5,922 Thanks: 525 Thanked 6,472 Times in 1,878 Posts Reputation: 100372	Re: Netcitadel Firewall Builder V3.0.1.565 NetCitadel Firewall Builder 3.0.4.794 NetCitadel Firewall Builder 3.0.4.794 \| 8.55 Mb Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path. Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines. Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed. [Only registered users can see links. ] [Only registered users can see links. ] [Only registered users can see links. ]

04-29-2009, 01:31 PM	#5 (permalink)
-.__KinG__.- BaBY--Boy Join Date: Jul 2007 Posts: 3,353 Thanks: 462 Thanked 4,690 Times in 1,473 Posts Reputation: 100000	Re: Netcitadel Firewall Builder V3.0.1.565 NetCitadel Firewall Builder 3.0.4.794 NetCitadel Firewall Builder 3.0.4.794 \| 8.55 Mb NetCitadel Firewall Builder v3.0.4.794 Firewall Builder is a GUI firewall configuration and management tool that supports iptables (netfilter), ipfilter, pf, ipfw, Cisco PIX (FWSM, ASA) and Cisco routers extended access lists. Both network administrators and hobbyists managing firewalls with policies more complex that is allowed by simple web based UI can simplify management tasks with the application. The program runs on Linux, FreeBSD, OpenBSD, Windows and Mac OS X and can manage both local and remote firewalls. With Firewall Builder, administrator can manage multiple firewalls using the same database of network objects. Change made to an object is immediately reflected in the policy of all firewalls using this object Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode and can update policy of multiple firewalls in one session In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. [Only registered users can see links. ] Above link contain 4 mirror links 2shared depositefile filefactory Rapidshare

05-24-2009, 10:41 PM	#6 (permalink)
Autumn Royal Member Join Date: Mar 2008 Posts: 3,418 Thanks: 438 Thanked 2,911 Times in 865 Posts Reputation: 100000	Re: Netcitadel Firewall Builder V3.0.1.565 Netcitadel Firewall Builder v3.0.1.565 Firewall Builder is a GUI firewall configuration and management tool that supports iptables (netfilter), ipfilter, pf, ipfw, Cisco PIX (FWSM, ASA) and Cisco routers extended access lists. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations Key Features Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path. [Only registered users can see links. ], which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. [Only registered users can see links. ] adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines. Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed. HomePage: [Only registered users can see links. ] [Only registered users can see links. ]

09-11-2009, 02:11 PM	#7 (permalink)
_____Mr.Juzzto_____ ...::::Vipra_Help::::... Join Date: May 2008 Location: ....::::SOUTH_MEDHION::::...... Posts: 2,501 Thanks: 132 Thanked 1,158 Times in 748 Posts Reputation: 20000	Re: Netcitadel Firewall Builder V3.0.1.565 NetCitadel Firewall Builder v3.0.6 \| 7.97MB NetCitadel Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path. Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines. Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed. Download from Hotfile - All Country [Only registered users can see links. ]

09-11-2009, 02:28 PM	#8 (permalink)
Autumn Royal Member Join Date: Mar 2008 Posts: 3,418 Thanks: 438 Thanked 2,911 Times in 865 Posts Reputation: 100000	Re: Netcitadel Firewall Builder V3.0.1.565 [Only registered users can see links. ] NetCitadel Firewall Builder v3.0.6 \| 7.97MB NetCitadel Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path. Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines. Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed. Download: [Only registered users can see links. ]

09-11-2009, 07:35 PM	#9 (permalink)
-Rishu- -RISHU- Join Date: Nov 2007 Location: London Posts: 5,643 Thanks: 420 Thanked 1,974 Times in 812 Posts Reputation: 19999	Re: Netcitadel Firewall Builder V3.0.1.565 NetCitadel Firewall Builder v3.0.6 \| 7,71MBs NetCitadel Firewall Builder is multi-platform firewall configuration and management tool. It consists of a GUI and set of policy compilers for various firewall platforms. Firewall Builder uses object-oriented approach, it helps administrator maintain a database of network objects and allows policy editing using simple drag-and-drop operations. Firewall Builder currently supports iptables, ipfilter, OpenBSD PF as well as Cisco PIX and Cisco IOS extended access lists. Being truly vendor-neutral, Firewall Builder can generate configuration file for any supported target firewall platform from the same policy created in its GUI. This provides for both consistent policy management solution for heterogeneous environments and possible migration path. Policy compiler for PIX, which recently has been released under GPL, allows Firewall Builder to function as a sophisticated policy management software for Cisco PIX firewall with access to all functions of PIX including newest features added in v7.x. Policy compiler for Cisco IOS Access Lists adds support for router access lists and turns Firewall Builder into complete solution for the multi-tiered network security. Firewall Builder allows for management of multiple firewalls using the same network object database. Change made to an object is immediately reflected in the policy of all firewalls using this object. Administrator only needs to recompile and install policies on actual firewall machines. Built-in interactive installer uses ssh to communicated with the firewall and can automatically copy generated policy and activate it. Installer supports batch mode of operation and can update policy on multiple firewalls in one session. In Firewall Builder, administrator works with an abstraction of firewall policy and NAT rules; software effectively "hides" specifics of particular target firewall platform and helps administrator focus on implementation of security policy. Backend software components, or policy compilers, can deduct many parameters of policy rules using information available through network and service objects and therefore generate fairly complex code for the target firewall, thus relieving administrator from having to remember all its details and limitations. Policy compilers can also run sanity checks on firewall rules and make sure typical errors are caught before generated policy is deployed. Features: GUI and compilers v3.0.6 require API library libfwbuilder version 3.0.6 Summary Most notable new features in this release: * Bug fixes in the GUI to improve stability and fix problems with policy printing * Additional optimizations in generated iptables script * Improvements in the policy compiler for PF to streamline generated configuration For those who wish to build from source, instructions are outlined in the document "Install and Build instructions" on our web site Improvements and bug fixes in the GUI * bug #2807724: "Print out FWB still not ok". Rule groups were always printed expanded, even if they were collapsed by the user in the GUI. * bug #2823668: "MDI window glitch". If the GUI had two or more MDI windows and user moved rules in one of them, the GUI switched to another after the operation was complete. * bug #2835193: "Modulate state doesnt work for PF". The name Xml attribute used to hold the value of "module state" option was entered incorrectly in the dialog. Improvements and bug fixes in the policy compiler for iptables * bug #2820840: "IPT: prolog script+iptables-restore silent incompatibility". With this fix the GUI does not allow for the prolog script to be placed after policy reset if iptables-restore is used to activate iptables rules. Also policy compiler for iptables checks for this condition and aborts with an error message if prolog place is set to "after reset" but iptables-restore is used to activate policy. Configuration may end up with this combination of options if user set prolog place to "after reset" first and switched activation method to iptables-restore later. * bug #2821050: "loading new fw rules on iptables 1.4.3.2+ gives warnings". starting with v1.4.3.1 iptables started giving warnings when negation ("!") is used after --option. This fix adds version "1.4.3" to the list of recognized iptables versions in fwbuilder and makes compiler generate extrapositioned version of the option such as "! --option arg". * bug #2819901: "sub-optimal expansion of negated interface". Policy rules with single interface object in "interface" rule element with negation should generate iptables commands using "-i ! itf" or "-o ! itf" rather than multiply the rule using all other interfaces of the firewall. Note that for iptables v1.4.3 and later, extrapositioned syntax is used, such as "! -i itf". * bug #2822098: "IPT: adds useless "-i +" iin some cases". Added optimization to remove redundant "-i +" and "-o +" if chain is INPUT or OUTPUT. * bug #2823951: "unnecessary rules in FORWARD chain". Policy rules that have interface object in "Interface" column and direction "Both" generate unnecessary iptables commands in the FORWARD chain when destination matches one of the addresses that belong to the firewall. * Implemented a better way to do optimization for "-i +", "-o +" for bug #2822098: check for interfaceStr equal to "" instead of re->isAny() bug #2836321: "SNAT rule that changes Trans Src and Trans Port does not work". Dual translation rules that change source address and destination port are now supported. Improvements and bug fixes in the policy compiler for PF * bug #2820162 "Bad sysctl name for OpenBSD pf" - the sysctl argument for IPv6 forwarding was incorrect. * Implemented change per bug #2828602: "PF Compiler Direction Both no Duplication Patch". PF rules with direction "both" used to be split to make two rules, one with direction "inbound" and another with direction "outbound". This was an artefact of old rule generation model where user could choose to permit everything outbound and only generate inbound rules, or generate both inbound and outbound rules. Since we now always generate both in abd out rules and PF matches both directions when neither "in" or "out" is specificed, this splitting has become redundant. * Applied patch per bug report #2828633: "Patch: Warning when changing rule direction in compiler". This adds warning when rule direction is changed by the compiler because object in source or destination was firewall itself. * remove extra white space after tcp port spec if source port match was not used in the rule. * bug #2835193: "Modulate state doesnt work for PF". Check variable "modulate state" in rule optiopns and global firewall options. If checkbox is turned on in the firewall options, then we always use "modulate state". This option can also be turned on for an individual rule using rule options dialog. Improvements and bug fixes in the policy compiler for Cisco IOS ACL * bug #1778536 "IOSACL - remark command". Remarks now include rule comments; if comment consists of several lines, each line is added using separate remark statement. This works for both IOS ACL and PIX platforms. * Improvements and bug fixes in the policy compiler for Cisco ASA (PIX) * Improvements and bug fixes in libfwbuilder * fixed bug #2820152: "Address ranges and other such need IPv4/v6 typing". AddressRange object should be recognized and removed from the rule if it is used in ipv6 rule set. To do this, add virtual method hasInetAddress() (should return true) to indicate that this object has an address. This works since virtual method getAddressPtr() has been implemented anyway. * bug #2823424: "Deleting UserService object breaks data file format". When user deleted UserService object, it was moved to the "Deleted Objects" library which broke XML file because DTD did not allow UserService element as a child of Library DownloadSize: 2,65 MB) [Only registered users can see links. ]

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
USB FireWall 1.1.0	moosa	Software related	4	08-06-2009 01:11 PM
Firewall Killer	shabzl33t	Hackers' Lounge	8	05-28-2008 07:11 AM
Hackmans Firewall v1	~~ViT~~	Yahoo! Tools	0	04-25-2007 05:02 PM