mathan

Mac Address Changer

This tool chage the mac address, help to hack the networks, LAN, WAN (Wi-fi) Hack ing the network



home page: [Only registered users can see links. ]
[code]

morphe

u need to put and AV scan bro....
and besides this is ur 1st post....

so guys for those interested to this prog...

wait for staff approval b4 downloading it..
no bad feelings bro..nothing personal at all..
more power Vipra

badz

not kinda sure about this one...lets wait 4 bro vit to check it....

....:::Jain:::....

Impossible there is not any software that change your mac [Media Access Control] address bcz mac is serial address code for single hardware & routers also has a single mac but if you connect the lan in router you change the lan mac in router's mac to run connection. mac is mainly use for security.

jo3isk00l

ey bro u dont need software to change nic mac address just do the following....



Windows 2000/XP/Vista: The Hard Way


In XP you can use the regedit to edit the registry from a GUI or the reg command to edit it from the console, I’ll be using regedit. Information on all your NICs can be found the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\ Class\{4D36E972-E325-11CE-BFC1-08002bE10318}\ . Under this key you will find a bunch of sub keys labeled as 0000, 00001, 0002 and so forth. We can assume any MAC address we want by finding the key that controls the NIC we want to change, putting in a string value called “NetworkAddress� and setting it to the MAC address we want to use formatted as a twelve digit hex number (example: 000000000001). To find out which key is which we can search through them for the value “DriverDesc� until we find the one that matches the NIC we wish to alter. After you set “NetworkAddress� to the address you want just restart the NIC by disabling it then enabling it (or in the case of PCMCIA cards, just eject and reinsert). You can confirm the MAC address change by using the “getmac� or “ipconfig /all� commands.

Linux

To change your MAC address in Linux (and most *nix system) is easy as pie. All it takes is two easy to script commands:



ifconfig eth0 down hw ether 00:00:00:00:00:01

ifconfig eth0 up



These two little commands would set your eth0 interface to use the MAC 00:00:00:00:00:01. Just plug in the NIC you want to set and the MAC address you want to use into the commands above and your done. Changing your MAC address is one of those things that is much easier to do in Linux then under Windows.

Web-Zone-Attack

ur modem back side u can see ur mac address.. i think not change ur mac adresss but ur ip change.. u can hide ur mac address but not change ur mac address

FuLcRuM

FuLcRuM

LINK UPDATED
[Only registered users can see links. ]

moosa

Mac Address Changer 5.3


Change your Mac Address in seconds! Scan Mac Address within any range of IP address. Exports the scanning results from a Mac Address Lookup list. Change the Mac Address of your network card to any new Mac Address.



Features:

. scans any range of IP for the proper Mac Address.
· it's shockingly easy to use, just a simple input and click, that's it!
· supports exporting scanning results to txt file.
· runs on all Windows operating systems (i.e., 95/98/NT/2000/Me/XP/Vista).
· supports changing Mac Address of any networks cards under Windows NT/2000/XP/Vista
· checks your Mac Address inputting.
· recommends the proper Ethernet network card.
· displays the information of your computer. (i.e. your computer name, Mac Addresses and IP etc.)

to work perfect in Windows Vista run it as administrator

[Only registered users can see links. ]


PASS NEEDED IS: nOMAD

issah_doll

here i have some scan from virustotal!